Swingarm Yamaha R1 / 60th Anniversary / ABS / GYTR / M / S / WGP / We R1 2015 - 2024 (made by Febur - Italy)

#FE1400

#FE1400

#FE1400

#FE1400

#FE1400

#FE1400

#FE1400

Made of aluminum.

One couple of chain adjusters and a speed sensor holder are included.
Rear brake caliper holder and chain sliders are not included.

Bearings are not included and it fits the stock ones.

Wheel stem is not included and it fits the stock one.

It doesn't fit the stock rear wheel and it needs an aftermarket one like OZ, Marchesini, PVM or others with max rim hub diameter 140 mm.
It requires two spacers with external diameter 40 mm that are not included in this kit.

This racing swingarm is built entirely by hand.
Some very small manufacturing micro-imperfections on the external surface are therefore possible.

Weight 15.609 lb | 7.080 kg

#FE1538

For Febur swingarm.
To use on the fixing tube to the frame and on the suspension link connection.

Weight 0.322 lb | 0.146 kg

#FE1539

#FE1539

Raw to be painted.
For Febur swingarm.

Weight 0.317 lb | 0.144 kg

#FE1546

For Febur swingarm and stock stem.

#FE1547

For Febur swingarm and Febur stem.
Two screws and two nuts are included: they are made of stainless steel.

It needs #FE720 Febur nut.

Weight 0.772 lb | 0.350 kg

#FE1564

For Febur swingarm.

Weight 0.161 lb | 0.073 kg

#FE1565

For Febur swingarm.

Weight 0.141 lb | 0.064 kg

#FE716Y

For Yamaha Febur swingarm and Brembo rear brake caliper 84 mm.

#FE1554

For Febur swingarm.

Weight 0.340 lb | 0.154 kg

#FE717

Made of steel.
For Febur swingarm.

Weight 1.682 lb | 0.763 kg

#FE720

Made of stainless steel.
For Febur swingarm.

Weight 0.106 lb | 0.048 kg

#FE722

Made of stainless steel.
For Febur swingarm chain adjuster.

Weight 0.060 lb | 0.027 kg