RED Racing Parts logo
Flame
Mail
Bandiera italiana

Racing clip-ons Aprilia RS 660 / 35kW / Limited Ed 2020 - 2022 | made by Melotti Racing Italy

The parts listed below are for use on Aprilia:
- RS 660 of the years 2020, 2021 and 2022
- RS 660 Limited Ed of the year 2022
- RS 660 35kW of the years 2020, 2021 and 2022.

Excellent Quality...Zero Compromises!!!

Couple racing silver clip-ons | Melotti Racing

Left arrow
Couple racing silver clip-ons | Melotti Racing
#SMAP721122
Couple racing silver clip-ons | Melotti Racing
#SMAP721122
Couple racing silver clip-ons | Melotti Racing
#SMAP721122
Right arrow

Developed to match Melotti Racing upper triple clamp.

An allen key binds the handlebars and top fork bridge allowing a continuous handlebars rotation of 14°, from the original opening to the racing one.
This solution gives a further advantage in terms of safety for the driver and facilitates set-up operations in the case of forks disassembly (the handlebars remain bound to the top fork bridge) and for adjusting handlebars opening.

GP-type bracelet-bar front coupling system (cone-shaped) to obtain a high rigidity and a minimum external encumbrance.
This choice offers the possibility to use the entire bar length for the controls assembly.

Predetermined collapse section to avoid, in case of bar break due to a fall, the overloading of the fork sleeve which would irretrievably damage the internal hydraulics too.

The handlebar is also designed with an anti-rotation and anti-slip system.
This solution guarantees maximum safety and allows a quick and precise positioning of levers and buttons for Teams that use the pre-assembled controls on the bars, whenever it is necessary to disassemble the bar from the bracelet after a fall.

Vernier to adjust the handlebars opening angle.
The combined use of these handlebars with Melotti Racing top yoke makes the adjustment extremely easy and quick without using special masks.

Two stainless steel screws for fastening the bracelet.

A vernier on the outer end of the bar is helpful in case you need to shorten its length.

- Inclination angle 7°
- Advancement offset 20 mm
- Tube (bar) length 240 mm
- Exploitable length 240 mm
- Tube external diameter 22 mm
- Tube internal diameter 16.5 mm
- For forks diameter 51 mm.

Code SMAP721122
Price USD 341.26
Price USD 300.31
Delivery 5-10 days

couples
add to cart
12% off
free shipping

Couple of racing black clip-ons | Melotti Racing

Left arrow
Couple of racing black clip-ons | Melotti Racing
#SMAP721112
Couple of racing black clip-ons | Melotti Racing
#SMAP721112
Couple of racing black clip-ons | Melotti Racing
#SMAP721112
Right arrow

Developed to match Melotti Racing upper triple clamp.

An allen key binds the handlebars and top fork bridge allowing a continuous handlebars rotation of 14°, from the original opening to the racing one.
This solution gives a further advantage in terms of safety for the driver and facilitates set-up operations in the case of forks disassembly (the handlebars remain bound to the top fork bridge) and for adjusting handlebars opening.

GP-type bracelet-bar front coupling system (cone-shaped) to obtain a high rigidity and a minimum external encumbrance.
This choice offers the possibility to use the entire bar length for the controls assembly.

Predetermined collapse section to avoid, in case of bar break due to a fall, the overloading of the fork sleeve which would irretrievably damage the internal hydraulics too.

The handlebar is also designed with an anti-rotation and anti-slip system.
This solution guarantees maximum safety and allows a quick and precise positioning of levers and buttons for Teams that use the pre-assembled controls on the bars, whenever it is necessary to disassemble the bar from the bracelet after a fall.

Vernier to adjust the handlebars opening angle.
The combined use of these handlebars with Melotti Racing top yoke makes the adjustment extremely easy and quick without using special masks.

Two stainless steel screws for fastening the bracelet.

A vernier on the outer end of the bar is helpful in case you need to shorten its length.

- Inclination angle 7°
- Advancement offset 20 mm
- Tube (bar) length 240 mm
- Exploitable length 240 mm
- Tube external diameter 22 mm
- Tube internal diameter 16.5 mm
- For forks diameter 51 mm.

Code SMAP721112
Price USD 341.26
Price USD 300.31
Delivery 5-10 days

couples
add to cart
12% off
free shipping

For more info and applications, look up:

clip-ons | Melotti Racing

RED Racing Parts Reviews

Parts arrived today.
Thanks.

A. M. | Great Britain 2023-07-17

RED Racing Parts®™
Casella Postale 704 - 18100 Imperia (IM) - Italy
info@redracingparts.com
VAT No. IT01130260084 | REA IM-93869

Site developed by John
Copyright © 1995-2024 | All rights reserved