Exhaust system Yamaha R6 / ABS / GYTR / Race 2006 - 2025 | made by LeoVince Europe

#15403BU

#15403BU

To fit on stock collectors.

For racing use only.
Not approved for street use.

Sleeve made of AISI 304 stainless steel.
Shot blasted end cap made of AISI 304 stainless steel.
Laser etched LV logo.
Ceramic matte black paint.
TIG weldings.
Laser cut bracket made of AISI 304 stainless steel.
Collector pipe made of AISI 304 stainless steel.

Noise without dB-killer 99.00 dB(A) @ 7250 rpm.

#15403CU

#15403CU

To fit on stock collectors.

For racing use only.
Not approved for street use.

Sleeve made of matte carbon fiber.
Shot blasted end cap made of AISI 304 stainless steel.
TIG weldings.
Bracket made of matte carbon fiber.
Collector pipe made of AISI 304 stainless steel.

Noise without dB-killer 99.00 dB(A) @ 7250 rpm.

#15403TU

#15403TU

To fit on stock collectors.

For racing use only.
Not approved for street use.

Shot blasted sleeve made of Titanium Grade 1.
End cap made of AISI 304 stainless steel.
Laser etched LV logo.
TIG weldings.
Laser cut bracket made of Titanium Grade 1.
Collector pipe made of AISI 304 stainless steel.

Noise without dB-killer 99.00 dB(A) @ 7250 rpm.

#15215BU

#15215BU

To fit on stock collectors.

For racing use only.
Not approved for street use.

Sleeve made of AISI 304 stainless steel.
Shot blasted end cap made of AISI 304 stainless steel.
Laser etched LeoVince logo.
Matte black finish.
Rear stainless steel mesh.
TIG weldings.
Laser cut bracket made of AISI 304 stainless steel.
Collector pipe made of AISI 304 stainless steel.

Noise without dB-killer 96.60 dB(A) @ 7250 rpm.

#15215FBU

#15215FBU

To fit on stock collectors.

For racing use only.
Not approved for street use.

Sleeve made of AISI 304 stainless steel.
End cap made of AISI 304 stainless steel.
Laser etched LV logo.
Full matte black finish.
TIG weldings.
Laser cut bracket made of AISI 304 stainless steel.
Collector pipe made of AISI 304 stainless steel.

Noise without dB-killer 96.60 dB(A) @ 7250 rpm.

#15215T

#15215T

To fit on stock collectors.

EU homologation: ECE-Approved.
It complies with the ECE-R92 noise directive.

Fully made of Titanium Grade 1.
Laser etched LeoVince Titanium logo.

TIG weldings.
Laser cut bracket made of Titanium Grade 1.
Collector pipe made of Titanium Grade 1.

Noise without dB-killer 96.60 dB(A) @ 7250 rpm.

#8483SNU

#8483SNU

For racing use only.
Not approved for street use.

Made of AISI 304 stainless steel.
End cap made of carbon fiber with matte clear coating.
Laser etched LeoVince logo.
Fastening strap made of matte carbon fiber.
Header pipes made of AISI 304 stainless steel.

Noise with dB-killer 103.00 dB(A) @ 7250 rpm.
Noise without dB-killer 108.00 dB(A) @ 7250 rpm.

#8482SNU

#8482SNU

For racing use only.
Not approved for street use.

Two layers pre-preg matte carbon sleeve.
End cap made of carbon fiber with matte clear coating.
Fastening strap made of matte carbon fiber.
Header pipes made of AISI 304 stainless steel.

Noise with dB-killer 103.00 dB(A) @ 7250 rpm.
Noise without dB-killer 108.00 dB(A) @ 7250 rpm.

#8483STNU

#8483STNU

For racing use only.
Not approved for street use.

Titanium grade 1 outer sleeve.
End cap made of carbon fiber with matte clear coating.
Laser-etched LeoVince and Limited Edition logos.
Fastening strap made of matte carbon fiber.
Header pipes made of AISI 304 stainless steel.

Noise with dB-killer 103.00 dB(A) @ 7250 rpm.
Noise without dB-killer 108.00 dB(A) @ 7250 rpm.

#3015200801R

#3015200801R

To reduce noise.

To fit on LeoVince LV 10, LV 10 Titanium, LV 10 Black Edition and LV 10 Full Black.

Diameter 2.13 in | 54 mm
Weight 0.331 lb | 0.150 kg

Tech info