Water oil radiator Ducati Panigale V4 S 2025 | made by Febur Italy

#FE1613

#FE1613

Made of aluminum.
With bleed screw to speed up cleaning.

It needs removing stock air fans.
With mesh guard on the front.

All hardware included for an easy mounting.
It keeps the stock thermostatic valve and oil hoses.

All upper section cools down water.
The trapezoidal lower section cools down engine oil.

You must check oil pressure before using.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

It does not allow the use of the side engine stand.
Stock air fans must be removed.
To fit with racing faring only.

To fit with stock thermostatic valve.

#FE1615

#FE1615

Made of aluminum.
With bleed screw to speed up cleaning.

It needs removing stock air fans.
With mesh guard on the front.

All hardware included for an easy mounting.
With kit to remove the stock thermostatic valve.
It keeps the stock oil hoses.

All upper section cools down water.
The trapezoidal lower section cools down engine oil.

You must check oil pressure before using.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

It does not allow the use of the side engine stand.
Stock air fans must be removed.
To fit with racing faring only.

The thermostatic valve removal kit is included.

#FE1616

Made of aluminum.
With bleed screw to speed up cleaning.

It needs removing stock air fans.
With mesh guard on the front.

All hardware included for an easy mounting.
It keeps the stock thermostatic valve.
It keeps the stock oil hoses.

All upper section cools down water.
The trapezoidal lower section cools down engine oil.

You must check oil pressure before using.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

It allows the use of the side engine stand.
Stock air fans must be removed.
To fit with racing faring only.

To fit with stock thermostatic valve.

#FE1618

#FE1618

#FE1618

Made of aluminum.
With bleed screw to speed up cleaning.

It needs removing stock air fans.
With mesh guard on the front.

All hardware included for an easy mounting.
With kit to remove the stock thermostatic valve.
It keeps the stock oil hoses.

All upper section cools down water.
The trapezoidal lower section cools down engine oil.

You must check oil pressure before using.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

It allows the use of the side engine stand.
Stock air fans must be removed.
To fit with racing faring only.

The thermostatic valve removal kit is included.

#FE1614

#FE1614

To fit on stock or Febur radiator.

With silicone hoses.
It does not allow the use of the side engine stand.

Developed with Ducati Barni WorldSBK Team.

#FE1617

#FE1617

To fit on stock or Febur radiator.

With silicone hoses.
It allows the use of the side engine stand.

Developed with Ducati Barni WorldSBK Team.