RED Racing Parts Logo
Home
Flame
Mail
Warning
Bitcoin logo
free worldwide shipping
add items to cart and get 10% off (20% off paying with bitcoins) * only up to 12 December 2017
Shopping cart
Checkout

Dasy-X data acquisition system (made by I2M - Italy)

Dasy-X data acquisition system

Dasy-X data acquisition system
#DASYX

Dasy-X data acquisition system allows you to acquire several parameters.
Recording trajectories and GPS speeds you can obtain laptimes, and as many split times as you like (accurate to 1/100 s).
You can also add the acquisition of RPM, rear wheel speed, gears in use, TPS, all without adding any auxiliary sensor.
Otherwise, by adding sensors you can also record suspensions, front wheel speed, tire temperature, brake pressure, the value of lambda sensor or any other sensor signal up to a total of 6 analog channels, 2 speed and 1 RPM and you can now add many other channels with our plug&play kit via can bus.
Dasy-X is composed by 2 distinct but joined elements: the multi input central unit (that contains the hardware needed) and the software Danas which allows the user to analyze data acquired.
The system is easily customizable for each pilot needs.
If a driver needs a plain version, he can use Dasy-X only with GPS data, however being able to understand where can improve his performances analyzing various GPS paths and splits of different laps.
If a pilot wish to understand also how to improve he can simply add bike provided signals.
If a pilot wants a more detailed analysis he can use the complete system adding auxiliary sensors.
Dasy-X system is based on a compact central unit which receive power supply (12 V) directly from the bike and for that reason can acquire data for a long time, limited only by the internal memory available for storage (128 Mb).
On the front panel you can find all the connectors for the various inputs available.
Each input has its own connector so it is simple to install and use Dasy-X.
On the top of the box, a led allows to monitor the working status of the system and you can find the USB plug fro data download.
The data collected is stored on a flash memory.
At the end of the session it will be possible to connect a PC directly to the system through Dasy-X USB front plug in order to download data.
If you do not have a PC you can download data and system configuration, even through a simple USB key.
Connecting the key, the system will download the data without need any external command.
At the end of the process, the led stops flashing and you will extract the key.
The data already present on the external memory will not beaffected thus making it possible to use this method of downloading with any key, even already partially used.
The analisys of the collected data using 10 Hz GPS technology becomes easy even for novice users thanks to Dasy-X.
GPS tracking allows to instantly identify what parts of the track relate with each point of collected data moreover it gives valuable information about speed and trajectory.
The further acquisition of RPM, throttle, rear wheel speed (without additional sensors) allow to give a concrete meaning to the collected data and convert this information directly to the driving information.
Thanks to its output sync, Dasy-X is able to control the activation of on-board cameras like FlyCamOne2, obtaining video synchronous with the data collected.
Videos can then be visualized and then analyzed using the video function of Danas.
Thanks to the functionality offered by Dasy-X you can acquire a set of data that you can use as overlay in video.
In the video below you can see the amounts taken by one of our customer, thanks to software TrackVision and a video taken with a bullet cam, he got a movie of his run on the track very similar to that seen in the World competitions.

Thanks to the CAN BUS connection, Dasy-X can acquire multiple parameters depending of what is transmitted by the original central unit.

Features
- Detection trajectories and GPS speed to 10 Hz
- Display accelerations and decelerations
- 8 analog inputs 10 bit
- 2 independent speed inputs
- 1 RPM input
- 10 auxiliary multiplexed inputs
- USB data download or by USB key
- Use of a remote command
- Output for displaying times
- 32 configuration options to start sampling
- Saving on internal memory 128 Mb
- Comparative analysis of different rounds or different sessions
- Calculation of km traveled, best lap, lap ideal session length
- 2 CAN BUS
- Compact dimensions 120 x 80 x 24 mm
- Low weight: 200 g (central unit) + 90 g (GPS)
- Receiver 10 Hz with 66 channels.



PDF logo Tech info

PDF logo Danas software

Code DASYX
Price EUR 555.00
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Dasy-X Lambda data acquisition system

Dasy-X Lambda data acquisition system
#DASYXLAMBDA

Dasy-X Lambda data acquisition system allows you to acquire several parameters.
Recording trajectories and GPS speeds you can obtain laptimes, and as many split times as you like (accurate to 1/100 s).
You can also add the acquisition of RPM, rear wheel speed, gears in use, TPS, all without adding any auxiliary sensor.
Otherwise, by adding sensors you can also record suspensions, front wheel speed, tire temperature, brake pressure, the value of lambda sensor or any other sensor signal up to a total of 6 analog channels, 2 speed and 1 RPM and you can now add many other channels with our plug&play kit via can bus.
Dasy-X Lambda is composed by 2 distinct but joined elements: the multi input central unit (that contains the hardware needed) and the software Danas which allows the user to analyze data acquired.
The system is easily customizable for each pilot needs.
If a driver needs a plain version, he can use Dasy-X Lambda only with GPS data, however being able to understand where can improve his performances analyzing various GPS paths and splits of different laps.
If a pilot wish to understand also how to improve he can simply add bike provided signals.
If a pilot wants a more detailed analysis he can use the complete system adding auxiliary sensors.
Dasy-X Lambda system is based on a compact central unit which receive power supply (12 V) directly from the bike and for that reason can acquire data for a long time, limited only by the internal memory available for storage (128 Mb).
On the front panel you can find all the connectors for the various inputs available.
Each input has its own connector so it is simple to install and use Dasy-X Lambda.
On the top of the box, a led allows to monitor the working status of the system and you can find the USB plug fro data download.
The data collected is stored on a flash memory.
At the end of the session it will be possible to connect a PC directly to the system through Dasy-X Lambda USB front plug in order to download data.
If you do not have a PC you can download data and system configuration, even through a simple USB key.
Connecting the key, the system will download the data without need any external command.
At the end of the process, the led stops flashing and you will extract the key.
The data already present on the external memory will not beaffected thus making it possible to use this method of downloading with any key, even already partially used.
The analisys of the collected data using 10 Hz GPS technology becomes easy even for novice users thanks to Dasy-X Lambda.
GPS tracking allows to instantly identify what parts of the track relate with each point of collected data moreover it gives valuable information about speed and trajectory.
The further acquisition of RPM, throttle, rear wheel speed (without additional sensors) allow to give a concrete meaning to the collected data and convert this information directly to the driving information.
Thanks to its output sync, Dasy-X Lambda is able to control the activation of on-board cameras like FlyCamOne2, obtaining video synchronous with the data collected.
Videos can then be visualized and then analyzed using the video function of Danas.
Thanks to the functionality offered by Dasy-X Lambda you can acquire a set of data that you can use as overlay in video.
In the video below you can see the amounts taken by one of our customer, thanks to software TrackVision and a video taken with a bullet cam, he got a movie of his run on the track very similar to that seen in the World competitions.

Thanks to the CAN BUS connection, Dasy-X Lambda can acquire multiple parameters depending of what is transmitted by the original central unit.

Dasy-X Lamda has got an oxygen Bosh 4.9 sensor embedded and with the aid of Danas software can manage stoichiometric maps and their corrections.

Features
- Detection trajectories and GPS speed to 10 Hz
- Display accelerations and decelerations
- 8 analog inputs 10 bit
- 2 independent speed inputs
- 1 RPM input
- 10 auxiliary multiplexed inputs
- USB data download or by USB key
- Use of a remote command
- Output for displaying times
- 32 configuration options to start sampling
- Saving on internal memory 128 Mb
- Comparative analysis of different rounds or different sessions
- Calculation of km traveled, best lap, lap ideal session length
- 2 CAN BUS
- Compact dimensions 120 x 80 x 24 mm
- Low weight: 200 g (central unit) + 90 g (GPS)
- Receiver 10 Hz with 66 channels
- Oxygen lambda sensor controller.



PDF logo Tech info

PDF logo Danas software

Code DASYXLAMBDA
Price EUR 832.50
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Plug & play cables for BMW S 1000 RR 2009 - 2017

Picture is not available.
Will be published as soon as possible.

#PLUGPLAYDASYS1000RR

To connect directly Dasy-X / Lambda to the OEM connectors.

To be used on BMW:
S 1000 RR 2012 - 2017.



Code PLUGPLAYDASYS1000RR
Price EUR 44.40
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Plug & play cables for Ducati 899 / 959 / 1199 / 1299 Panigale 2012 - 2017

Picture is not available.
Will be published as soon as possible.

#PLUGPLAYDASYPANIGALE

To connect directly Dasy-X / Lambda to the OEM connectors.

To be used on Ducati:
899 Panigale 2014 - 2015
959 Panigale 2016 - 2017
1199 Panigale 2012 - 2014
1199 Panigale S 2012 - 2014
1199 Panigale S Tricolore 2012 - 2013
1199 Panigale R 2012 - 2014
1199 Panigale RS 2012 - 2015
Panigale R 2015 - 2017
1199 Superleggera 2014
1299 Panigale 2015 - 2017
1299 Panigale S 2015 - 2017
1299 Panigale RS 2015 - 2016.



Code PLUGPLAYDASYPANIGALE
Price EUR 44.40
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Plug & play cables for Yamaha YZF-R1 / ABS / We R1 / 60th Anniversary / M / S 2015 - 2017

Picture is not available.
Will be published as soon as possible.

#PLUGPLAYDASYR12015

To connect directly Dasy-X / Lambda to the OEM connectors.

To be used on Yamaha:
YZF-R1 2015 - 2017
YZF-R1 2016 - 2017
YZF-R1 We R1 2015 - 2017
YZF-R1 ABS We R1 2016
YZF-R1 60th Anniversary 2016
YZF-R1 We R1 60th Anniversary 2016
YZF-R1M We R1 2015 - 2017
YZF-R1M 2016 - 2017
YZF-R1M ABS 2016 - 2017
YZF-R1S 2016 - 2017.



Code PLUGPLAYDASYR12015
Price EUR 44.40
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Sensors wiring

Sensors wiring
#SOSP

This wiring let you easily connect to differents sensor using the data acquisition connector.
It is configured to connect a speed sensor for front wheel, pressure sensor for brake, two potentiometers and two tire temperature sensors.
Each input can also be used for any other type of analog sensor.



Code SOSP
Price EUR 66.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Inductive speed sensor

Inductive speed sensor
#SENSVEL

To acquire speed signal from rear wheel (if your bike doesn't have the original one) or from the front wheel.
It is very useful to compare different speed between front and rear wheels.



Code SENSVEL
Price EUR 66.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Linear potentiometer 75 mm

Linear potentiometer 75 mm
#POTLIN75

For front or rear suspension.

Working temperature range -30 / +100 °C.
With 1 meter cable.



Code POTLIN75
Price EUR 288.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Linear potentiometer 150 mm

Linear potentiometer 150 mm
#POTLIN150

For front or rear suspension.

Working temperature range -30 / +100 °C.
With 1 meter cable.



Code POTLIN150
Price EUR 288.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Spare joint of potentiometer

Spare joint of potentiometer
#POP

Code POP
Price EUR 8.88
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Brake pressure sensor 50 bar

Brake pressure sensor 50 bar
#SENSFRENI50

To measure braking system pressure.
Analog output 0 - 5 V.

To be used with brake joint hose that is not included.



Code SENSFRENI50
Price EUR 222.00
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Brake pressure sensor hose

Brake pressure sensor hose
#TUB1

To connect brake pressure sensor.



Code TUB1
Price EUR 27.75
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Tyre temperature infrared sensor

Tyre temperature infrared sensor
#SENSTEMPGOMM

Suitable for measuring tire temperature.

Temperature range 0 - 150 °C.
Analog output 0 - 5 V.



PDF logo Tech info

Code SENSTEMPGOMM
Price EUR 133.20
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Controller lambda LS1 with sensor

Controller lambda LS1 with sensor
#CONTLS1

Controller for lambda sensor bosh 4.9 (included).
Analog output 0 - 5V.
Output range 8 - 22 AFR.



Code CONTLS1
Price EUR 288.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Controller lambda LS1 without sensor

Controller lambda LS1 without sensor
#LS1

Controller for lambda sensor bosh 4.9 (not included).
Analog output 0 - 5V.
Output range 8 - 22 AFR.



Code LS1
Price EUR 166.50
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Spare lambda LSU 4.9 sensor

Spare lambda LSU 4.9 sensor
#SNSLSU49

Code SNSLSU49
Price EUR 144.30
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Spare GPS receiver

Spare GPS receiver
#CHROMEGPSRECEIVER

Weight Kg 0.071

Code CHROMEGPSRECEIVER
Price EUR 66.60
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

Spare molex connector of sensors

Picture is not available.
Will be published as soon as possible.

#CONNM

Code CONNM
Price EUR 5.55
Delivery in 6-12 days.
pieces

add to cart
and get 10% off
plus free shipping

For more info and applications, look up:
- data acquisition systems

22 years with RED Racing Parts

RED Racing Parts was born on July 26th, 1995.
.....more info

RED Racing Parts®™
Casella Postale 704
18100 Imperia (IM) - Italy
red@redracingparts.com
Partita IVA IT01130260084
REA IM-93869
Site developed by John & Fede
Copyright © 1995-2017
All rights reserved