free worldwide shipping add items to cart and get 10% off (20% off paying with bitcoins) * only up to 26 February 2018
Chrome Lite wide display dash logger Ducati Panigale (made by I2M - Italy)
Chrome Lite dashboard for Ducati Panigale
Picture is not available. Will be published as soon as possible.
Chrome Lite dashboard is a true innovation.
Thanks to a true color 800 x 480 pixel display and a 400 MHz processor, this dashboard guarantees extreme flexibility both for the designer and for the final user.
With this new technology it is possible to configure the main screen to best fit rider needs, either on the roads or on tracks, allowing proper room for each display indicator.
A color display allow to highlight warning signals such as a low battery charge, an empty tank or lack of oil and reserve level.
In the meanwhile this technology makes it easy to realize user friendly menus with a lot of info.
I2M chose this kind of display because it allows a perfect reading with direct sunlight too.
A special anti-glare glass removes unpleasant sunlight effects.
To improve furthermore its usability, Chrome Lite has got 12 high brightness leds fully customizable; each pilot can choose the alarms configuration they prefer, the traditional RPM bar, the low tire temperature alarm.
The aluminum case and a seven segment gear indicator auto adjusted in brightness complete the aesthetic side of this dashboard.
Chrome Lite is at the same time a dashboard, a chronograph and a data acquisition system.
One can use its useful menus to choose 20 pre-loaded circuits (and modify them as needed by importing/exporting to a USB key).
For each circuit 500 laps are recordable, and for each lap 3 splits are available.
Chrome Lite calculates and shows to the user the summary of each circuit data such as map, best lap, ideal lap, number of performed laps.
It keeps different stored data both for previous days sessions and for those of the current day in a way that allows the pilot to rapidly assess the daily trend.
On the graphic display you can directly inspect the circuit map so you can change the finish line or splits position using the dedicated cursor along the track.
Chrome Lite places side by side position and speed acquisition by a 10 Hz GPS, RPM reading, front and rear speeds and up to 8 external analog channels.
Acquisition allows data recording up to 1 Gb and a sampling frequency up to 100 Hz for each channel, thus to meet any acquisition need.
By an handy menu one can choose the sessions to be analyzed, ordered by track and date, or decide to remove or download them to an USB key.
Then you can use Danas software to analyze data on a PC.
The system has two configurations: Road and Track.
For each one the pilot can choose RPM range, if you rather display speed or temperature beside RPM, what to display in each available spot choosing among analog or digital channels, times, best lap, ideal lap, gap between times (as to be aware at any given time if you are improving or not your best lap).
It is also possible to decide not to display anything if not strictly essential, so to avoid distractions while driving.
If Chrome Lite is on Road mode, it would automatically switch on Track mode as soon as a finish line is crossed, and then switch back at the end of the session.
- 800 x 480 pixel graphic color display
- high visibility even in direct sunlight
- 400 MHz processor, 1 Gb memory
- aluminum case
- fully customizable in two configuration Road / Track
- 10 Hz trajectory and GPS speed acquisition, 66 parallel channels
- chronograph whit 20 pre-loaded tracks, 500 laps per track
- track auto identification, 3 splits
- best Lap, ideal Lap, best historical and daily values
- user friendly interface
- 12 high brightness alarm leds, fully customizable
- 8 analog inputs(10 bits)
- 2 distinct speed inputs
- 1 RPM input
- water, fuel, oil inputs with dedicated alarms
- gear in use
- data download via USB key
- 2 buttons for remote command
- CAN BUS ready
- 1 Gb internal memory
- 3 space counters
- 2 time counters
- auto generated stoichiometric ratios table (with optional probe)
- compact sizes (172 x 106 x 22 mm)
- water resistant.
Kit includes display, GPS receiver and main wiring.
To connect it needs the I2M sensors wiring if you want to use the I2M sensors.
Otherwise, it needs the I2M specific play & play wiring to connect it to the OEM ECU of your motorbike. CNC bracket is not included.
Suitable only on Ducati:
899 Panigale 2014 - 2015
959 Panigale 2016 - 2017
1199 Panigale 2012 - 2014
1199 Panigale S 2012 - 2014
1199 Panigale S Tricolore 2012 - 2013
1199 Panigale R 2012 - 2014
1199 Panigale RS 2012 - 2015
Panigale R 2015 - 2017
1199 Superleggera 2014
1299 Panigale 2015 - 2017
1299 Panigale S 2015 - 2017
1299 Panigale RS 2015 - 2016.
This wiring let you easily connect to differents sensor using the data acquisition connector. It is configured to connect a speed sensor for front wheel, pressure sensor for brake, two potentiometers and two tire temperature sensors. Each input can also be used for any other type of analog sensor.